Easy to Assemble

Kennel Carriers™ install in minutes. Four stainless steel bolts, four washers and four nuts included. Simply follow these four steps.

Step 1

Center the handles at least 1½ inches from the ends of the kennel in the desired position. Mark two drill holes per handle.

Step 2

Carefully drill holes through the kennel with a ¼ inch drill bit.

Step 3

Align the handles with the holes and insert the stainless steel bolts though the handles and into the kennel. If easier, remove the kennel's top to insert the bolts and nuts or get assistance to complete the next step.

Step 4

Place one washer and one nut on each bolt and tighten. Firmly secure the handles to the kennel with a screw driver and wrench.